混合药物粉尘输运过程静电特性实验研

兽药制药粉尘加工工艺过程中,由于粉尘颗粒之间或颗粒与设备、管壁之间的碰撞、摩擦,导致装置内部静电荷量积聚,激发静电放电,粉尘燃烧或爆炸的事故频发。实验主要通过包括粉尘与管材摩擦的漏电电流测试和静电放电火花对粉尘云点燃敏感性测试两部分。结果表明:单一药物药粉的静电漏电电流随着管材管径的增大,管长的增长,静电漏电电流逐渐变大;随着倾斜角的增大,静电漏电电流先增大后降低;镀锌铁管的漏电电流大于PVC管,电荷逸散速度更快。单一兽药粉的粉尘云放电火花最小点燃能量随质量浓度的变化,呈现二次曲线的变化趋势。混合兽药粉与单一兽药粉的漏电电流和粉尘云放电火花最小点燃能量的测试结果的变化趋势是一致的。     

基于EPMA的背角无齿蚌贝壳中元素分布的初步研究

应用电子显微探针元素分析技术,对背角无齿蚌（Anodonta woodiana）的贝壳（棱柱层和珍珠层）进行了19种元素（Ag、Al、Au、Ca、Co、Cu、Fe、Hf、Mg、Mn、Mo、Na、Re、Se、Sn、Sr、Tl、V、Zn）分布特征的初步研究.元素面分布分析和定量线分析结果均直观而明显地表明：贝壳中Ca含量最高,Hf、Re、Mn、Al、Co、Fe、Sr、Cu和Na的含量较低,而Au、Mg、Tl、Zn、Sn、Ag、V、Mo和Se的含量甚少.Mn在珍珠层的分布高于棱柱层,壳顶区域的珍珠层的含量（0.087±0.045）%显著高于棱柱层（0.030±0.025）%（P<0.05）,腹缘区域的珍珠层的含量（0.072±0.055）%亦显著高于棱柱层（0.044±0.025）%（P<0.05）,而其余元素在贝壳中均匀分布.     

Preconcentration of cadmium and copper ions on magnetic core–shell nanoparticles for determination by flame atomic absorption

Magnetic core–shell nanoparticles modified by (3-aminopropyl) trimethoxy silane were prepared and used as adsorbent for the extraction and preconcentration of cadmium and copper ions. The ions were desorbed with nitric acid followed by determination with flame atomic absorption spectrometry. The extraction conditions were investigated systematically. The method was applied for the determination of Cd(II) and Cu(II) ions in different water samples. The accuracy was also evaluated through analysis of certified reference material.     

改性核桃壳对石油烃类物质的吸附试验研究

为了研究改性制备核桃壳对石油烃吸附程度,以化学改性制备核桃壳为吸附剂,考察了溶液p H值、时间和温度对改性核桃壳吸附石油烃效果的影响。结果表明:当温度为298 K,p H为7.0,0.2 g改性核桃壳吸附处理100 m L浓度为60 mg/L的柴油溶液,80 min后吸附量最大,可达到12.57 mg/g。该吸附过程符合准二级动力学方程,其相关系数达到0.9999。在3种温度(298,308,318 K)条件下的吸附等温曲线更符合Freundlich模型。通过热力学计算证实,该吸附过程是吸热的、自发的过程,一定程度上的升温有助于石油烃的吸附。     

Validation of the UN test method N.5

Many substances react with water in such a way that flammable gases are formed. For transport issues this reaction may possess a considerable hazard especially if the cargo is wetted by rain or by water from other sources. In the UN Recommendations on the Transport of Dangerous Goods these kinds of problems are addressed. The UN test N.5 “Test method for substances which in contact with water emit flammable gases” corresponds to this hazard. Classification according to the test method is done by measurement of the gas evolution rate of the flammable gas by any suitable procedure. At BAM a gravimetric approach is used to measure the gas evolution rate. In this paper we present the evaluation of the apparatus by means of an absolute calibration routine utilizing a reaction where a known amount of gas is produced as well as the evaluation of important parameters influencing the gas evolution rate using different substances. It can be shown that the apparatus is capable of measuring absolute gas volumes as low as 6 mL with an acceptable error of about 17% as determined from the reaction of Mg with demineralized water.     

轧钢污泥综合利用的技术研究

阐述了一种轧钢污泥的回收处理技术,该技术可把轧钢污泥有效地分离成氧化铁粉和混合油,实现综合利用,减少铁素资源浪费,有良好的经济效益和环境效益.     

Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Removal of Remazol Brilliant Violet-5R dye using periwinkle shells

The purpose of this research is to obtain optimal processing conditions for the adsorption of Remazol Brilliant Violet-5R (RBV-5R) dye onto activated carbon prepared from periwinkle shells (PSAC) by chemical activation with KOH using response surface methodology. Central composite design (CCD) was used to determine the effects of three preparation variables; CO₂ activation temperature, CO₂ activation time and KOH:char impregnation ratio (IR) on two responses; percentage RBV-5R dye removal and PSAC yield. Based on the CCD, two quadratic models were developed for percentage RBV-5R dye removal and PSAC yield, respectively. The most influential factor on each experimental design response was identified from the analysis of variance (ANOVA). The optimum conditions for the adsorption of RBV-5R dye onto PSAC were CO₂ activation temperature of 811 °C, CO₂ activation time of 1.70 h and IR of 3.0, resulting in 81.28% RBV-5R dye removal and 28.18% PSAC yield. PSAC prepared under optimum conditions was mesoporous with a Brunauer–Emmett–Teller surface area of 1894 m²·g^?1, total pore volume of 1.107 cm³·g^?1 and average pore diameter of 2.32 nm. The surface morphology and functional groups of the activated carbon were respectively determined from the scanning electron microscopy and Fourier transform infrared analysis.     

大豆蛋白粉喷雾干燥塔尾气余热的回收与利用

针对大豆蛋白粉生产过程中喷雾干燥塔尾气温度较高,有回收利用价值的现实,也针对目前的节能需求,对现有的喷雾干燥塔的尾气排放部分进行改造,设计一个片状空气预热器,以利用高温的尾气与系统的进气做热交换,实现热量再利用,降耗和提高蛋白粉产率的目的,并对投资收益进行了分析。     

从粉煤灰中提取多种微细氧化物的研究

将粉煤灰与Na2CO3按一定的比例混合后焙烧,采用酸碱联合法提取粉煤灰中氧化硅、氧化铝和氧化铁,分析了工艺条件对粉煤灰中氧化物提取率的影响。实验结果表明,从粉煤灰中提取氧化物的最佳条件是:碳酸钠与粉煤灰的比例0.6∶1.0,焙烧温度850℃、盐酸浓度4 mol/L,氢氧化钠浓度2.6 mol/L,浸取时间约6 h。在此条件下得出微细氧化硅、氧化铝、氧化铁的晶体,其平均粒度分别为氧化硅1.107μm,氧化铝1.334μm,氧化铁0.783μm。